C Purine Roll Forming Machine
C Purline Roll Forming Machine
Process flows:
Hydraulic de-coiler------leveler------guide rack------feeding material------roll forming----hydraulic cutting----production support table
Machine process sketch:
Consist part:
Hydraulic de-coiler
Guide rack
Seven rollers leveler
Forming machine
Proofread
Cutter
PLC control box
Hydraulic pump station
Production support table
Main technical parameter:
Raw material width :1. 4”×2”×5/8 2. 6”×2”×5/8
Raw material thickness: 0.7~1.5mm Galvanized High Tensile 550 MPA
Forming steps: 12 steps
Forming speed: 8~14M/min
Roller material: bearing steel after hardening
Roller bearing diameter : Φ70mmRoll former Roll forming
Bearing material: 45# steel (hardening and tempering)
Side plate thickness: S18mm
Bottom sheet: 36# H-section steel
Main machine power: 11 KW
Hydraulic pump station power: 3KW Roll forming machine
Hydraulic pressure: 20 MPa
Electronic control system: PLC computer control
Main machine size: approximately 7500mm*600mm*800mm
Machine weight: approximately 4 Tons
Hydraulic cutter material: Cr12Movcold roll forming
Length error : ± 2mm
Transmission: 1.5' chain
cutting part:
Cutting after forming: cutting the length according to your needs
Cutting operation: the main machine will be stop automatic, then cutting ,And the machines keep working after cutting
The model of calculate the length: automatic to calculate
The error of the length : ±2mm
Control system
Automatic to calculate the length: by one couple encoder light press on the steel panel surface, then the encoder can measure the length when induction
Automatic to record the sheet number
Setting the length and the number, then automatic cutting the panel and it will be stop when arrival your setting
Can setting ten different kinds of the length one time
The max Length allowed to setting is 99Meter
Simple operation, automatic to change the error of the size
Display the finish production quantity
Electric pressure: 380V, 50HZ, 3-phase
