YX-Floor Decking Roll Forming Machine
Product Description
1, The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length. At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard.
Roll Forming Machine
2. The wall panel and inner roof panel feature good appearance, high coverage, high strength, high automation, low cost and long lifetime. The panels are widely used in civil construction such as factory, garage and gymnasium.
Roof Panel Forming Machine
Double Layer Forming Machine
3. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request.
| Floor decking roll forming machine | ||
| Description | Galvanized steel pipe| Specification |
|
| 1 | Main moter power | 18.5 kw |
| 2 | Hydaulic sation power | 5.5kw |
| 3 | Hydraulic station pressure | 10-12 MPa |
| 4 | Control system | PLC |
| Oil pipeline | 5 | thickness | 0.8-1.2mm |
| 6 | Forming speed | 12m/min |
| 7 | Forming station | 24 |
| 8 | Cutting material of blade | Cr12 |
| 9 | Hydraulic oil pump | CB-E310 |
| 10 | Diameter of principal axis | 85mm |
| 11 | Frame thickness | Wall Panel Forming Machine 20mm |
| 12 | sprocket | P-25.4 |
| 13 | Active shaft material | High grade No. 45 carbon steel |
| 14 | Material of roller | 45#steel hard chrome plating |
| 15 | voltage | 380v 3 phase 60HZ |
